hi guys,
So i had replaced my stock wastegate actuator (worn out spring) with an adjustable aftermarket one.
the spring in the new one is for 0.5bar
I eye balled the wastegate adjustment when attaching the new one (turbo remained in the car), and I think there isnt enough preload on it.
with full'ish throttle in third gear i get up to 0.9bar or so, it doesnt hold there tho.
as per OPEN SID Badp is always at 0 after many hard pulls.
should I be putting more preload on the wastegate actuator until I start seeing Badp change from zero?
Car has Stage 1. I run 93 octane.
So i had replaced my stock wastegate actuator (worn out spring) with an adjustable aftermarket one.
the spring in the new one is for 0.5bar
I eye balled the wastegate adjustment when attaching the new one (turbo remained in the car), and I think there isnt enough preload on it.
with full'ish throttle in third gear i get up to 0.9bar or so, it doesnt hold there tho.
as per OPEN SID Badp is always at 0 after many hard pulls.
should I be putting more preload on the wastegate actuator until I start seeing Badp change from zero?
Car has Stage 1. I run 93 octane.